How to Install an Oil Pump Shaft
When something is in need of a replacement or installation in your vehicle, being able to complete the job yourself will save you a lot of money. Installing an oil pump shaft can run you a few hundred dollars at a body shop, but with a few easy steps, you will be able to buy the necessary parts yourself and get the job done.

1
Drain oil from oil pan into a plastic container. Set aside or dispose of the oil.

2
Remove oil pan bolts wtih a socket wrench.

3
Insert the thin wide screwdriver between the oil pan and the motor to loosen and remove oil pan.

4
Unscrew oil pump bolts with a socket wrench. Remove the oil pump from the motor and set aside.

5
Insert the shaft with the small circular retainer into the motor. The circular retainer should be facing toward the distributor.

6
Bolt the oil pump onto the motor using the oil pump bolts.

7
Reinstall the oil pan by screwing in the oil pan bolts. Tighten with a socket wrench.

Do you mean:oil pump,Diaphragm Pump ,Chemical Pump,Screw Pump,Vacuum Pump,Centrifugal Pump