Double jacket thermal insulation resin pump

Double jacket resin pump

It's gear pump. Applicable to non-delivery of solid particles and fibers, non-corrosive, temperature no higher than 80 C degree, viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) of lubricating oil or a similar nature lubricants other liquids, as well as for hydraulic drive system.

The scope of application

Pipeline system can be used in transmission, booster; in the fuel system can be used as a transmission, pressure, fuel injection pump; in the hydraulic system may be used to provide hydraulic power in the hydraulic pump; in all industrial fields , the pump can be used for lubricating oil.
 
Structural characteristics

This series of gear pump main gear, shaft, pump body, pump cover, bearing kits, shaft seal and so on. Double arc gear tooth manufacturing sinusoid. It involute gear compared to the most prominent advantage is the process of meshing gear tooth profile surface there is no sliding, so no tooth wear, a smooth operation, the phenomenon is no liquid, low noise, long life and high efficiency. The pump from the shackles of traditional design, making gear pump in the design, production and use have entered a new area.

Pump with overload protection as a safety valve, pressure relief valve for returning full-rated pump discharge pressure of 1.5 times. May also allow the pressure from the scope of further adjusted according to actual needs. But attention to the safety valve pressure relief valve can not make long-term task, requiring the road can be installed in the tube.

Shaft seal design for the client in two forms, one for mechanical seals, and the other one is packing seal can be used in accordance with specific circumstances and determine user requirements.